中文

Conveying System

roller conveyor
Double speed chain conveyor
Power roller machine
Establishment mechanism
Narrow belt conveyor
Module belt conveyor
Non powered roller
belt conveyor
Rotatruder
Transfer conveyor
chain conveyor

PRODUCT CHARACTERISTICS

PRODUCT CHARACTERISTICS

  • Adopting roller belt to support the front and rear brackets
    It is generally used for conveying parallel to the support legs of the Sichuan style pallet, in order to reduce the downward deflection of the pallet during the conveying process.


roller conveyor

Conveyor speed

12-16 m/min

length

1200-4000mm

load

1800kg

Surface treatment and coating

Rack acid washing, phosphating treatment, and spray coating

width

800-1600mm

height

350-1000mm

control mode 

Manual, single machine automatic, and online automatic control modes

Noise control

When the conveyor is working, its noise level should not exceed 75 decibels


  • frame structure
    Aluminum profile body, carbon steel profile spray coating tripod
  • The lifting of the transfer machine is driven by a cylinder and equipped with a guiding device
  • The lifting of the transfer machine is driven by a cylinder and equipped with a guiding device
    0-30m/min
  • Transfer and transportation form
    Adopting double row U-shaped flat top attached plate chain
  • The driving roller adopts a chain driven welded roller, and the surface is galvanized
  • The side edge of the conveyor adopts rollers or Fulai wheels
  • The main frame of the conveyor is made by bending carbon steel plates
  • Surface treatment process for the outer surface of the framework
    Spray treatment
  • Establishment mechanism
    Adopting a non powered design, utilizing the self weight of the tires, and reserving arcs and slopes on the mechanism for self movement
  • Set up a roller conveyor chute below the sliding device
    The tire rolls along the groove to the end
  • End configuration door of tire setting mechanism
    The door opens and the tires can smoothly roll onto the ground or onto the truck.
  • Roller transfer machine used in conjunction with narrow belt conveyor
    Can be perfectly embedded into the gap of the roller machine
  • The conveyor belt adopts a high friction coefficient rubber belt
  • The main frame of the conveyor is made by bending carbon steel plates
  • Surface treatment process for the outer surface of the framework
    Spray coating treatment after sandblasting, acid washing, phosphating and other processes
  • The power used by the conveyor
    0.55-3kW or calculated based on the corresponding production cycle
  • Linear velocity of conveying surface
    15-50m/min
  • Install noise reducing rubber rollers and wear-resistant strips below the module belt
    The idler is made of rubber and wrapped around the finished idler, which not only supports the module belt but also absorbs noise
  • The main frame of the conveyor is made by bending carbon steel plates
  • Free roller surface galvanized and polished
  • The installation method of free rollers is fixed with bolts
    In specific situations (such as frame parts that bear large loads), a shaft core fixed with flat tenons at both ends is used to ensure the bearing strength of the roller.
  • The main frame of the conveyor is made by bending carbon steel plates
  • Surface treatment process for the outer surface of the framework
    Spray coating treatment after sandblasting, acid washing, phosphating and other processes; The side edge of the conveyor adopts Fulai wheels.
  • Belt Conveyor Power
    0.55~3kW, needs to be calculated based on the corresponding length and production cycle
  • Linear velocity of conveying surface
    15-50m/min
  • Drive roller
    After welding, it is necessary to eliminate internal stress treatment, drive the roller with taper to achieve automatic correction function, and use galvanized treatment on the surface
  • Passive roller
    After welding, internal stress treatment must be eliminated, and the passive roller has a taper to achieve automatic correction function. The surface is treated with galvanizing
  • The pallet is rotated 90 ° or 180 ° in the conveying direction for transportation
    It is a device that transports vertically in a conveyor line.
Rotatruder notes
Conveyor speed 12-16 m/min
height 350-1000mm   
control mode  Manual, single machine automatic, and online automatic control modes
Noise contro

When the conveyor is working, its noise level should not exceed 75 decibels
width  800-1600mm
load 1800kg
Rotation Time

3S/90°
Surface treatment and coating Rack acid washing, phosphating treatment, and spray coating




  • One end of the transfer machine nested inside the chain conveyor
    In the conveying system, it is used for turning and conveying cargo pallets in the conveying direction, and is a device that transports goods vertically in the conveying line.


Transfer conveyor notes
Conveyor speed 12-16 m/min
height 350-1000mm   
control mode  Manual, single machine automatic, and online automatic control modes
Noise control

When the conveyor is working, its noise level should not exceed 75 decibels
width  800-1600mm
load 1800kg
Lifting time

3S
Surface treatment and coating Rack acid washing, phosphating treatment, and spray coating



  • Tray type chain conveyor
    Adopting a three row/double row chain style with load-bearing front and rear brackets
  • chain conveyor
    Driven by a gear driven integral motor reducer


chain conveyor notes
Conveyor speed 12-16 m/min
length 1200-6000mm
load 1800kg
Surface treatment and coating Rack acid washing, phosphating treatment, and spray coating
width 800-1600mm
height 350-1000mm
control mode Manual, single machine automatic, and online automatic control modes
Noise control When the conveyor is working, its noise level should not exceed 75 decibels